The Zodiac Baracuda MX 8 automatic swimming pool cleaner launched in 2012 has been manufactured unsing proven Zodiac technology. The Zodiac Baracuda MX8 is designed with simplicity in mind for both service and installation, the focus behind the cleaner being one designed for years of carefree operation. The MX8 is designed for the following applications:
Covering most types of pool floor shapes
Capturing a vast range of typical pool debris
Improved coverage across the pool floor
Latest turbine design allowing operation in low flow conditions
Light weight body great for easy storage and removal from the swimming pool
Excellent fast access release button, allowing entry to the turbine clearing of blockages within seconds
Bayonet hose connections reducing 'hose pop off' and potential pump de-priming
Like most mechanical devices the Zodiac Baracuda MX8 requires periodic adjustments, routine maintenance and the replacement of of certain hardworking parts, often wear caused by rough swimming pool surfaces and incorrect water balance.
For optimum performance we recommend and minimum of a 0.75hp swimming pool pump is required to operate the Baracuda MX8, and for those using variable speed pumps the power is set to the highest setting and flow restrictor that comes with the cleaner is set to the optimum setting. Prior to set up as with any suction pool cleaner it is imperative a manual clean of the swimming pool is carried out in the first instance, as suction pool cleaners are designed to keep a clean pool clean. Remember to close the main drain for optimum suction to either the vacuum point or skimmer. Aim your return fittings downwards to avoid the cleaner being blown to the opposite end of the swimming pool.
The Zodiac is set to become the best and most advanced swimming pool suction cleaner in the swimming pool market place, With the latest MX8 turbine suction technolgy.
Covering most types of pool floor shapes
Capturing a vast range of typical pool debris
Improved coverage across the pool floor
Latest turbine design allowing operation in low flow conditions
Light weight body great for easy storage and removal from the swimming pool
Excellent fast access release button, allowing entry to the turbine clearing of blockages within seconds
Bayonet hose connections reducing 'hose pop off' and potential pump de-priming
Like most mechanical devices the Zodiac Baracuda MX8 requires periodic adjustments, routine maintenance and the replacement of of certain hardworking parts, often wear caused by rough swimming pool surfaces and incorrect water balance.
For optimum performance we recommend and minimum of a 0.75hp swimming pool pump is required to operate the Baracuda MX8, and for those using variable speed pumps the power is set to the highest setting and flow restrictor that comes with the cleaner is set to the optimum setting. Prior to set up as with any suction pool cleaner it is imperative a manual clean of the swimming pool is carried out in the first instance, as suction pool cleaners are designed to keep a clean pool clean. Remember to close the main drain for optimum suction to either the vacuum point or skimmer. Aim your return fittings downwards to avoid the cleaner being blown to the opposite end of the swimming pool.
The Zodiac is set to become the best and most advanced swimming pool suction cleaner in the swimming pool market place, With the latest MX8 turbine suction technolgy.
| Info Page | No |
| Best Sellers | Yes |
| Featured | No |
| Is New | Yes |